Accessories

  • Slide Sheets view larger image Slide Sheets Accessories To move a patient more easily on a bed or floor. Manufactured in tubular form so that siliconed nylon surfaces help positioning.


view sizes...
Small - Yellow 70 x 66cm
Medium – Blue 120 x 66 cm
Large – Green 150 x 66 cm
Wide – Red 125 x 100 cm
  • Mattress Cradle CRD view larger image view larger image view larger image To hold either a static or alternating anti-pressure mattress. When inflated air mattresses are narrower than the bed leaving a possible entrapment space at the sides. The cradle raised sides help to fill these gaps.
  • Mattress Underlay view larger image Give an even surface on slated bed surfaces and provides a protective underlay in the event of deflation. Being only 50mm deep, “the height above the surface of the top rail” should not be a problem when using a second mattress.
  • Extended height rails ERI To meet regulations for height of rail above mattress surface-extra 145mm. When used with metal rails extra extend length to 190cm. Solves problems when air mattress is placed on top of static mattress.


     view larger image
    view larger image
  • Smoking Apron SAP view larger image A full fire retardant apron for use in a room, set a side for smokers or on the terrace. Wide enough to cover both knees and chair arms, leaving no side gaps.
  • Head and Foot board Padding HFSTD view larger image These parts of the bed can now be protected with this wipe clean padded bumper

    100cm long – tapered for side rail tracking.
  • Layer-Of-Air view larger image To provide that illusive interface between mattress and patient, this three dimensional fabric enable air to circulate.
    Preventing heat and moisture build up.
    Available in washable fitted sheet form Mattress cover (zipped) Also cushion covers

  • Clothing Protectors TNB view larger image Washable clothing protection comes in two sizes and two colours. A deluxe soft brushed poly viscose surface with a superior waterproof backing. Studs or hook and loop fastenings.

view sizes...
TNBS Small at 70cm long
TNBL Large at 86cm long
  • Towelling Clothing Protector view larger image Studs to fasten round nexk, towelling face, waterproof backing size 80cm Long (29inches).

    TWB
  • Bed Wedges FWL view larger image Many uses for this wedge include – A sitting up back rest, a pillow raiser, a foot raiser or a prone wedge. Made of polyurethane foam and covered in a vapour permeable wipe clean fabric.

    Size: 61 x 61 cm or 24 x 24 inches

  • Small Wedge FWS view larger image Small wedge covered in vapour permeable wipe clean material.

    Size: 22 x 15 x 5 cm
  • The Double Knee Wedge KBW view larger image This cushion simulates the action of a knee break on a profiling bed preventing the patient from slipping don the bed at the same time reducing pressure on the heels. Covered in vapour permeable wipe clean material and has a non slip base.
  • Wheelchair Fleece WW736L view larger image In pure wool pile honey beige colour with strong loops to hook round wheelchair handles to keep the fleece in position. Also available with attached arm covers.


view sizes...
WWW736L 43 x 92 cm or 17 x 36 inches
W736A 43 x 92 cm or 17 x 36 inches with arms
  • Calf Strap CS view larger image 100% pure wool pile (20.3cm or 8 inches high) strap to stop the 'pressing back' action of the user, and also for comfort. With strap to attach to foot rest legs.


view sizes...
Size: 20.3 x 40.6cm
or 8 x 16 inches
  • Foot Elevator This foam ring with top opening raises the heel from bed to promote healing with no pressure at all! Available with wipe clean vapour permeable cover or without cover for patient use.

    Top image: FRDC with cover
    Bottom image: FRD without cover
     view larger image
    view larger image
  • Leg Through THS view larger image This leg support not only offers comfort in raising the leg but will keep the heel above the bed surface and completely relieves pressure on the heel.

  • Foot Board FB1M FB2D view larger image To prevent user from slipping down the bed. Covered in simulated sheepskin. Available for divan beds or metal frame beds, easy and quick to fit any size of bed.

  • Laundry Bags LB view larger image Manufactured in heavy duty material to withstand vigorous washing. With draw string tie to prevent laundry escaping. 18 inch base. Available in 4 colour ways as shown in picture.

  • Ramps ARP, ARW view larger image Simple – Strong – Light ramps. Can be portable or fitted in place, in 2 variations, 1 piece (ARP) or 2 pieces (ARW)

    ARP: 62 x 102 cm or 24.5 x 40 inches
    ARP: 14 x 102 cm or 5.5 x 40 inches
  • Alternating Pressure Matress GGSU view larger image The back & arms of a chair make sitting up in bed more comfortable – elbows come into their own. Simulated lambswool cover and a pocket.

    BRA

Return to the top of the page